No products in the cart.


BudBox Pro GT1 – 1.8m x 1.1m x 2.4m – Grow Tent

SKU: 180x110x240_gt1
  • Product Description

    BudBox Pro GT1 – Perfectly Matched for a Gavita 1000W Fixture!

    The BudBox GT1 grow tent is specifically designed to get the very best out of your 1000W Gavita fixture, known throughout the industry as one of the biggest yielding lighting fixtures out there – the go-to choice for commerical growers operating on a mass scale. Use the two combined, and you’ll be looking at pulling in massive harvests in no time at all.

    • Specifically designed to support Gavita’s powerful 1000W lights and reflectors
    • Designed for better light penetration than a regular sized grow tent
    • More headroom – better for hanging vertically mounted ballasts
    • Fewer issues with temperatures thanks to the increased height
    • Metal, click-lock corner segments for an enhanced structure
    • Tough & durable, yet lightweight, outer shell that’s easy to fit
    • Viewing window with green filter panel
    • Twenty percent larger ventilation panels for enhanced air flow
    • Powder-coated tempered & rolled steel framework
    • Military-grade zips
    • Available in white or silver lining

    1 x Carry bag
    1 x White or silver lined fabric tent
    8 x Upright poles
    8 x Horizontal bars
    8 x Corner pieces
    4 x Hanging rails
    6 x Plastic hanging rail covers
    4 x Hanging straps
    1 x Waterproof spill-tray

    180cm x 110cm x 240cm

    Pole thickness: 25mm rolled steel
    Connector pieces: Rolled steel
    Ventilation panels: 2 (64cm x 25cm)
    Viewing window: Yes
    Irrigation bar and port: Yes
    Intake ports: 2 (23cm diameter)
    Extraction ports: 2 (23cm diameter)
    Cable ports: 4 (8cm diameter)
    Cooltube ports: 4 (8cm diameter)
    Doors:1 (front doors that zip all the way around to the sides), 1 x side access door

    How the BudBox Pro Works:

    BudBox tents are widely regarded as the best in the industry, but that hasn’t stopped their development team from making improvements. The new Pro range features design tweaks and improvements that will make your growing experience that bit richer!

    A Stronger Framework
    Metal Corners and click-lock poles for a framework that’s as strong as anything else on the market – easily capable of supporting your growroom equipment (and then some!). All poles and bars are powder-coated, drastically reducing the chances of corrosion.

    Check your plants Safely
    This tent has its own 11.5″ x 8″ viewing window. This allows you to check on your plants without opening the door and disturbing their environment. The window even has a transparent green filter on it – this is because light in the green area of the spectrum has no effect on plants’ light cycles. This means that you can look through the window and check on your plants at any time of day without negatively them.

    Improved Fabric Outer
    One of the things that made the original Budbox range such a hit was the quality of the fabric outer. The new outer, however, is even tougher and more durable than the original! It’s also a hell of a lot lighter, making the tent quicker and easier to erect and dismantle than the original range, while sacrificing none of its robustness.

    Which size fan and filter do I need for my Grow Tent?

    There exists a (relatively) easy formula to work out which size extraction you need for your space. Find out the volume in m3 (metres cubed) of your grow space with Width x Length x Height = Volume. Then, using that figure do, Volume x 60 = Air Movement Per Hour (this will refresh the air in your grow room every minute).

    If you are using a filter (which you are), then Air Movement Per Hour x 1.2 = the amount of air your fan will need to move. Use the figures below to match up your space to your preferred fan and filter combo!
    Bear in mind it’s always better to over spec your fan and reduce its output with a controller, this gives you the flexibility to increase its output to maintain optimum conditions for your plants, for example in the middle of summer.

    How to use the BudBox Pro GT1:

    Setting up your grow tent is a very quick and easy process. First, you’ll need to construct your framework as shown on the supplied instruction sheet. Then you’ll need to unfold and unzip the fabric outer. Look for the bottom area of the fabric outer and fit it to the bottom of the tent frame. Once it’s secured, you can then pull the rest of the outer up and over the top of the frame. A copy of the instruction sheet can be found in the attachments section, just below this description.

    BudBox instructions

You may also like…

This is a demo store for testing purposes — no orders shall be fulfilled. Dismiss

You must be 18 years old to visit this site. sells cannabis seeds as a collectable adult genetic preservation souvenir only. Please verify your age